關于點焊機的操作安全規范
2017-11-06
1、應經常潔沽硅整流器及其它部件,以延長其使用壽命。
1, should often clean sell silicon rectifier and other components, to extend its service life.
2、電焊機的飽和電抗器切勿振動更不應敲擊，否則將影響焊機性能。
2, electric welding machine of the saturable reactor don't vibration should not be hit more, otherwise will affect the welding performance.
3、電焊機在安裝前，應檢查硅整流元件與散熱片的連接是否牢固，如有松動,必須擰緊,以防接觸不良而燒毀硅整流元件。
3, electric welding machine before installation, should check whether silicon rectifier element connection with heat sinks and firm, if there are any loose, must tighten, in case of poor contact and burned silicon rectifier components.
電焊機的工作環境必須符合制造廠使用說明中的要求。
Welding machine working environment must be in conformity with the requirements of the manufacturers instructions.
4、屯焊機在搬運中,要盡可能地避免震動和碰撞,以免影響其性能。
4, tuen welder in handling, to avoid vibration and impact, as much as possible so as not to affect its performance.
5、使用前須先打開風扇電機,觀察電壓表指針位置是否正確,仔細查聽是否有不正常的聲音。
5, before use must first open the fan motor, observe the meter pointer position is correct, carefully check whether there is abnormal sound.
Chinese
English
